Search  Equipment

HYDRAULIC EXTENDIBLE STICK  Make the reach with extra length using AMI’s extendible stick for excavators. The reinforced outer case provides strength and rigidity while minimizing torsional forces. The bucket ...

EXCAVATOR TO SKIDSTEER ADAPTER  The AMI Skidsteer Adapter offers the flexibility and convenience of using skidsteer attachments on your excavator. The bolt-on lugging allows for rotation away from and towards th...

GRADING BEAM  Optimize your grading performance with the AMI Attachments excavator Grading Beam. Available in 72", 84” or 96” widths, the Grading Beam is ideal for levelling gravel and other material to a s...

HYDRAULIC COUPLER  Go ahead and get dirty because the new AMI Wheel Loader Hydraulic Coupler is ready to work in any mess. Designed to perform in real conditions, the locking cylinder is fully enclosed. Dirt an...

GENERAL PURPOSE BUCKET  To fill quickly material needs to roll. AMI angles the bucket floor up slightly helping to lift material into the bucket. Smooth curves and open design makes the clean out easy without m...

HEAVY DUTY GENERAL PURPOSE BUCKET  AMI’s Heavy Duty General Purpose Bucket is made of 100% Hardox steel and is ideal for highly abrasive work in gravel pits or rock quarries.         ...

2-PASS BUCKET  When every cycle counts, get the bucket that maximizes productivity without wasting payload, fuel or time. Designed to hold a true 10-yards heaped, this bucket reduces the passes needed to fill t...

LIGHT MATERIAL BUCKET  The AMI Light Material Bucket/Snow Bucket is an ideal attachment for all-season work with your wheel loader. Perfect for pushing snow or moving light materials around a yard or job site, t...

FERTILIZER BUCKET  Designed for granular loads, the AMI Fertilizer Bucket’s cubic yard volume is measured at struck level capacity instead of heaped.               ...

WOOD CHIP BUCKET  Designed for light duty applications, the AMI Woodchip Bucket increases visibility using a metal grate across the top of the bucket.               ...

SNOW BASKET  Get big volume and high visibility with the AMI extra wide Snow Basket for efficient snow removal.               ...

HIGH DUMP BUCKET  The High Dump Bucket features a bottom pivot point allowing the operators more bucket clearance when emptying a load.               ...

SCRAP GRAPPLE BUCKET  The cutout sidewall handles large loads of awkward, oversized material while the heavy-duty grapples clamp the load secure.               ...

GARBAGE GRAPPLE BUCKET  Large, semi-enclosed grapples contain and compress small, light material, making it easier to transfer and manage waste without spillage.            &nbs...

MULTI-PURPOSE 4-IN-1 BUCKET  Jack of all trades, the AMI 4-in-1 Bucket gives you the ultimate versatility, handling all the details on your job site.               ...

FEEDLOT GRAPPLE BUCKET  Handle bales, silage and bulk feed with the Feedlot Grapple Bucket for wheel loaders. When fully open, the grapple tines retract behind the plain of the bucket's cutting edge. This maint...

FEEDLOT GRAPPLE BUCKET WITH QUICK ATTACH  Handle bales, silage and bulk feed with the Feedlot Grapple Bucket with Quick Attach for wheel loaders. Featuring a fully removable grapple using a wedgelock system, th...

WASTE PILING BUCKET  Stay on top of the pile with AMI’s Waste Handling Piling Bucket. The bucket’s high profile is designed for maximum capacity, allowing you to move large volumes of material easily and ef...

WASTE HANDLING BUCKET  With a bolt-on rubber edge that acts as a squeegee for wet, sloppy material, this bucket is perfect for the job of waste handling.               ...

SKELETON BUCKET  Built with Hardox Wear Plate and Strenx Performance Steel, the AMI Skeleton Bucket is the ideal attachment for sorting large rocks and debris from sand and soil. The Skeleton Bucket comes with ...

EXTREME SERVICE SPADE NOSE ROCK BUCKET  Make your point with the AMI Spade Nose Rock Bucket for Extreme Service. Built for handling rock in mining and quarry applications, the AMI Spade Nose Rock Bucket loads e...

SEVERE DUTY SPADE NOSE ROCK BUCKET  Make your point with the AMI Severe Duty Spade Nose Rock Bucket for harsh working conditions. Built for handling rock in mining and quarry applications, the AMI Spade Nose Ro...

SPOON BUCKET  The AMI Spoon Bucket produces a controlled flow when handling gravel or loose material and backfilling manholes. The bucket's design allows for extra precision for material placement, especially w...

GRADING BUCKET  Make short work of your grading projects with the new AMI Grading Bucket. This bucket features a long, flat floor for optimal grading. The floor, cutting edge and side cutters are built with Har...

SIDE DUMP BUCKET  Easily handle material on highway construction sites, trenches and roadways without obstructing traffic. The Side Dump pivots smoothly using a cushioning cylinder, slowing the movement at both...

COAL STOCKPILE BUCKET  The AMI Coal Stockpile Bucket is used to load hoppers, conveyors, trucks or train cars from loose coal stockpiles. AMI Coal Stockpile buckets are 15-20% larger in capacity than coal seam ...

QUARRY FORK RACK (SHAFT TYPE TINE)  Working in the quarry’s tough, abrasive environment, AMI’s Quarry Extracting Fork is a rock solid performer. Capable of pulling out and transporting heavy rocks across th...

FORK RACK (LUMBER STYLE)  Flush with the extended backguards, the extra wide tines keep wide loads of piled lumber in place with strength and stability.               ...

COMPOST FORK  Designed for the precise handling of compost.               ...

FORK RACK WITH HYDRAULIC SIDE SHIFT  AMI’s Side Shift Fork Rack easily shifts the entire rack from side to side for precise pallet handling.               ...

FORK RACK (SHAFT TYPE TINE)  Add versatility to your loader with the AMI variable width Fork Rack that locks the tines in place easily.               ...

FORK RACK WITH HYDRAULIC TINE POSITIONERS  Hydraulically powered forks allow for quick adjustability of fork spacing, all from the seat of the cab.               ...

CAR BODY FORK  Ideal for scrap environments or salvage yards, the AMI Car Body Fork features long tines that allow you to lift up and move a variety of vehicles. The tines reach far under the vehicle's axle and...

360° ROTATING FORK RACK  Rotating a full 360-degrees, the AMI Rotating Fork Rack is built to handle heavy side loads for dumping containers. The large slew-ring of the hydraulic rotator provides strength and s...

FORK RACK (ITA HOOK TYPE)  Add versatility to your loader with the AMI variable width Fork Rack that locks the tines in place easily.               ...

FIXED BOOM POLE              ...

HYDRAULIC BOOM POLE  Extend and contract hydraulically using controls inside the cab for greater efficiency and safety with the Hydraulic Boom Pole; swivel hook optional.          &nb...

MECHANICAL BOOM POLE  Add crane versatility to your loader with the Mechanical Boom Pole; swivel hook optional.             ...

LOG AND LUMBER FORK GRAPPLE  Hold your own with the powerful clamp that wraps around the load. Ideal for cut logs or milled lumber, this fork/grapple makes awkward material handling an easy task.    &n...

MULTI-PURPOSE AG GRAPPLE  The work tool you need for all agriculture-related tasks! The AMI Multi-Purpose AG Grapple is built with Strenx Performance Steel, this one-piece hydraulic grapple is both light and str...

SAW LOG GRAPPLE  Designed to handle large volumes of logs at the sawmill, AMI’s Saw Log Grapple features a beveled tine profile for extra gripping power to withstand the toughest lumber mill applications. ...

LARGE DIAMETER PIPE GRAPPLE  With high visibility and tight radius, the by-pass grapple is able to clamp tightly around 6” diameter poles. The grapple hydraulic system has nitrate treated rods, cushioning cyli...

MAT GRAPPLE  Designed for high visibility and a mighty strength-to-weight ratio, grip on your load and keep it secure.             ...

PIPE AND POLE GRAPPLE  Keep your load secure with the 2-stage hydraulic grapple, designed to pick the load and clamp down evenly on the entire row of pipe or poles for safe travel.        &...

LOG GRAPPLE WITH LIVE TINE  Maintain exceptional control of your load with AMI’s Log Grapple with Live Tine. For log and lumber applications, operators can prevent logs from being damaged by adjusting the tine...

FEEDLOT GRAPPLE BUCKET  Handle bales, silage and bulk feed with the Feedlot Grapple Bucket for wheel loaders. When fully open, the grapple tines retract behind the plain of the bucket's cutting edge. This mainta...

FEEDLOT GRAPPLE BUCKET WITH QUICK ATTACH  Handle bales, silage and bulk feed with the Feedlot Grapple Bucket with Quick Attach for wheel loaders. Featuring a fully removable grapple using a wedgelock system, the...

QUICK ATTACH GRAPPLE  Increase the capacity of your existing general purpose bucket with the removable grapple from AMI Attachments. This fully removable grapple is a single unit that can be connected or disconn...

SCRAP GRAPPLE BUCKET  The cutout sidewall handles large loads of awkward, oversized material while the heavy-duty grapples clamp the load secure.             ...

GARBAGE GRAPPLE BUCKET  Large, semi-enclosed grapples contain and compress small, light material, making it easier to transfer and manage waste without spillage.             ...

ROOT RAKE GRAPPLE  Clear away unwanted roots, limbs and brush while leaving behind valuable soil. With the AMI Root Rake for wheel loaders, operators can efficiently clear away scrub more efficiently by reducing...

ROOT RAKE  Clear away unwanted roots, limbs and brush while leaving behind valuable soil. With the AMI Root Rake for wheel loaders, operators can efficiently clear away scrub more efficiently by reducing the amo...

ROOT RAKE GRAPPLE  Clear away unwanted roots, limbs and brush while leaving behind valuable soil. With the AMI Root Rake for wheel loaders, operators can efficiently clear away scrub more efficiently by reducing...

4-IN-1 ANGLE BLADE (FLUID EDGE)  The big 4-in-1 Blade is a system of four blade positions that give you the tools to clear large areas of snow fast. The endplates are hydraulically-controlled and equipped with i...

ANGLE BLADE (FLUID EDGE)  Clear the lot in record time with the high volume capacity of the AMI Reactor Angle Blade, offering over double the plowing width of a truck blade. That's efficiency and profitability i...

PUSHER BLADE (FLUID EDGE)  Pile it fast and high with the AMI Reactor Pusher Blade. Simply connect the Pusher to your loader using a quick coupler and get ready to gather and push using the boxed endplates for m...

3-IN-1 PUSHER BLADE (FLUID EDGE)  Pile it fast and high with the AMI Reactor Pusher Blade. Simply connect the Pusher to your loader using a quick coupler and get ready to gather and push using the boxed endplate...

4-IN-1 ANGLE BLADE (5′ WING WITH FLUID EDGE)  For maximum plowing versatility, the 4205, 5205 and 6205 4-in-1 models allow for greater clearing capacity at large sites with a five foot wing, with the flexibili...

SIDE WING BLADE  When it comes to leading-edge versatility during the harshest winter conditions, look no further than the AMI Snowblades’ Wheel Loader Hydraulic Wing Blade. Offering exceptional flexibility is...

ONE WAY BLADE  With a 10 ft. clearing path and 35-degree fixed angle, this One Way Blade is built for high speed operation, clearing snow quickly and thoroughly. Features include adjustable and replaceable skid ...